Rejuvenating Fog Seal

Find a Contractor/Supplier

Application Sequence

  • Calibrate and set the distributer to the application rate as determined by the design process
  • Prepare the surfacing using surface preparation guidelines
  • Apply rejuvenating fog seal, closely adhering to guidelines
  • Open the road to traffic when the sealer has sufficiently cured.


Application Guidelines

Ring Test Kit. The small plastic vial is scribed with marks equivalent to 0.10 and 0.20 gal/sq yd when applied to the 6” diameter circle.

- Ring test kit as shown in Figure 1 may be used to determine application rate.

- Sprayer and scale kit as shown in Figure 2 can be also used.

Determining application rate using sprayer and scale. Sprayer is weighed, material is sprayed over 1 sq yd, and sprayer weighed again.